Start a conversation

Drone Designer Crashes on Splash Screen Win 10

Issue : 

After installation Drone Designer Crashes on Splash Screen Win 10 when trying to run the application


Solution : Apart from other basic settings , Check whether nx is off on optin in bcdedit command. (DEP)

- Turn of the same by using the command : bcdedit.exe /set {current} nx AlwaysOff

- After execution run bcdedit again and check nx parameter value should be off

- Restart the System

- If the bcdedit.exe /set {current} nx AlwaysOff shows error : an error has occured setting the element data the value is protected by secure boot policy

- You need to go into the BIOS and disable the Secure Boot option (Enable legacy and disable Secure boot) , save and exit from Bios

- Run the command again : bcdedit.exe /set {current} nx AlwaysOff : It will show command executed successfully

- After execution run bcdedit again to verify nx parameter value should be off

- Restart the System again

- Drone Designer application should work properly

Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. WASP3D Administrator

  2. Posted

Comments